SMAW Stick electrodes
Tubular hardfacing electrode with C-Cr-Mo-B-V carbides.
This electrode with his extreme recovery offers excellent wear resistance in high velocity, fine particle applications in which erosive wear is a major problem. Further to be used against high general wear and medium impact.
Due to the Mo-content, abrasion resistance can be kept also with increased temperatures. For hardfacing of more than 3 layers it is recommended to buffer with an electrode like DUR E 350 Kb that delivers a welding deposit of less hardness. Overlays on steel with high tensile strength should be buffered with Croni 29/9 HL or 4370 HL.
1) up to 3 times faster ! (less current with more deposit)
2) No slag losses compare to 40% loss with standard electrodes.!
3) Low amperage offers much lower heat input ! (see point 1)
4) 6 mm is ideal to weld in position and on sharp edges !
5) Moisture resistant coating even in extreme humidity conditions !
1) up to 3 times faster ! (less current with more deposit)
2) No slag losses compare to 40% loss with standard electrodes.!
3) Low amperage offers much lower heat input ! (see point 1)
4) 6 mm is ideal to weld in position and on sharp edges !
5) Moisture resistant coating even in extreme humidity conditions !
- AWS:A 5.13: ~E FeCr-A7
- EN ISO:14700: E Fe14
- DIN:8555: E 10 – UM – 60 – Z